Menu
Showing 121–140 of 143 resultsSorted by latest
-
Bad Bunny 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Peach 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Female Skull 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Skull Killer Lemon 5 size
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
little ghost 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Polymer clay cutter Scallop and Tear in 5 sizes and 2 cut version/geometric earrings/STL DIGITAL DOWNLOAD
2,00 $⚠️⚠️⚠️ PLEASE READ BEFORE PURCHASING:
THIS IS NOT A PHYSICAL ITEM, DIGITAL FILES ARE NON-REFUNDABLE. YOU CAN DOWNLOAD THE FILES AFTER YOUR PAYMENT✅YOU CAN PRINT AND SELL AS MANY PRODUCTS AS YOU WANT.
❌YOU MAY NOT SELL OR DISTRIBUTE THE DIGITAL FILES IN ANY WAYThese cutters have very sharp edges, as small as 0.4mm and 0.7 mm
🤗 This creation is beautiful as well as accessible 💵💲
These are Scallops and Tear, I made them in 5 sizes and with 2 cutting versions: 20mm- 25mm- 30mm- 35mm- 40mm -
Dangle Scallop 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Hexagonal Slope 5 Size 2 Version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Cactus model 107 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Cactus 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
ASTRONAUT 5 SIZE 2 VERSIO CUT
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
OVNI 5 SIZE 2 VERSION CUT
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Dabgle Scallop 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
SCREAM 5 SIZE 2 VERSION CUT
2,00 $Welcome! We are EULITEC, we are specialists in creating jewelry with clay, we manufacture tools that facilitate the process of creating jewelry with polymer clay. If you have a 3D printer, you can find all the digital files you need to create beautiful jewelry here. Whether rollers, cutters or stampers, feel free to request custom…
-
Skull 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Lotus 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Model 88 Monstera 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Model organic 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Arch Lotus polymer clay 5 size 2 version cut
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡 -
Lady s swimsuit 5 sizes and 2 cut versions
2,00 $These cutters are special, with them you can cut clay and create beautiful works of polymer clay in a professional way.
Height is 15mm from base to cut edge
The cutting edge is 0.4 mm.
The reinforcing wall is 0.8 mm.
The base measures 3mm and a height of 2mmOur slicers are tested, made to resist and last a long time and that each cut is like the first, they are 100% functional, that is why we are leaders in this sector
These designs are intended to serve as embellishments on polymer clay jewelry.
With 0.4mm cutting edge, solid base and suitable height
Cutter size is measured from the longest ends.
🧡
